2016-2017 Summer Publication 
    
    Oct 24, 2021  
2016-2017 Summer Publication [ARCHIVED CATALOG]

Courses


“Prefix” equals Subject and “Code or Number” is the same as Catalog Number.

To view a list of courses for a particular discipline, click the arrow under “Type” to view choices.

Clicking the “Filter” button at the right starts the search.

 

Energy & Manufacturing Technology

  
  •  

    DEMR 1306 - Diesel Engine I


    3 Credits (3 hrs. lec.) An introduction to the basic principles of diesel engines and systems. Prerequisite: None
  
  •  

    DEMR 1310 - Diesel Engine Testing and Repair I


    3 Credits (2 hrs. lec., 3 hrs. lab.) An introduction to testing and repairing diesel engines including related systems and specialized tools. Prerequisite: None
  
  •  

    DEMR 1313 - Fuel Systems


    3 Credits (2 hrs. lec., 3 hrs. lab.) In-depth coverage of fuel injector pumps and injection systems. Prerequisite: None
  
  •  

    DEMR 1316 - Basic Hydraulics


    3 Credits (2 hrs. lec., 3 hrs. lab.) Fundamentals of hydraulics including components and related systems. Prerequisite: None
  
  •  

    DEMR 1317 - Basic Brake Systems


    3 Credits (3 hrs. lec.) Basic principles of brake systems of diesel powered equipment. Emphasis on maintenance, repairs, and troubleshooting. Prerequisite: None
  
  •  

    DEMR 1321 - Power Train I


    3 Credits (3 hrs. lec.) Fundamental repair and theory of power trains including clutches, transmissions, drive shafts, and differentials. Emphasis on inspection and repair. Prerequisite: None
  
  •  

    DEMR 1323 - Heating, Ventilation, and Air Conditioning Troubleshooting and Repair


    3 Credits (2 hrs. lec., 3 hrs. lab.) Introduction to heating, ventilation, and air conditioning theory, testing, and repair. Emphasis on refrigerant reclamation, safety procedures, specialized tools, and repairs. Prerequisite: None
  
  •  

    DEMR 1349 - Diesel Engine II


    3 Credits (2 hrs. lec., 3 hrs. lab.) An in-depth coverage of disassembly, repair, identification, evaluation, and reassembly of diesel engines. Prerequisite: DEMR 1306  
  
  •  

    DEMR 2312 - Diesel Engine Testing and Repair II


    3 Credits (2 hrs. lec., 3 hrs. lab.) Continuation of Diesel Engine Testing and Repair I. Coverage of testing and repairing diesel engines including related systems and specialized tools. Prerequisite: DEMR 1310 
  
  •  

    DEMR 2332 - Electronic Controls


    3 Credits (2 hrs. lec., 3 hrs. lab.) Advanced skills in diagnostic and programming techniques of electronic control systems. Prerequisite: None
  
  •  

    DEMR 2334 - Advanced Diesel Tune-Up and Troubleshooting


    3 Credits (2 hrs. lec., 3 hrs. lab.) Advanced concepts and skills required for tune-up and troubleshooting procedures of diesel engines. Emphasis on the science of diagnostics with a common sense approach Prerequisite: DEMR 1349 
  
  •  

    DEMR 2380 - Cooperative Education - Diesel Mechanics Tech


    3 Credits (1 hr. lec., 15 hrs. ext.) Career-related activities encountered in the student’s area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. Prerequisite: Department approval
  
  •  

    DEMR 2381 - Cooperative Education - Diesel Mechanics Tech


    3 Credits (1 hr. lec., 15 hrs. ext.) Career-related activities encountered in the student’s area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. Prerequisite: Department approval
  
  •  

    ELMT 1302 - Solar Photovoltaic Systems


    3 Credits (2 hrs. lec., 2 hrs. lab.) Design and installation of solar photovoltaic systems and their applications. Prerequisite:  ENGL 0304  and ENGL 0306 ; MATH 0306 ; Instructor approval
  
  •  

    ELMT 2341 - Electromechanical Systems


    3 Credits (2 hrs. lec., 2 hrs. lab.) Application of electromechanical systems. Emphasizes programmable control devices and solid state systems. Prerequisite: None
  
  •  

    ELMT 2433 - Industrial Electronics


    4 Credits (3 hrs. lec., 2 hrs. lab.) Devices, circuits, and systems primarily used in automated manufacturing and/or process control including computer controls and interfacing between mechanical, electrical, electronic, and computer equipment. Includes presentation of programming schemes. Prerequisite: RBTC 1401 , CETT 1402  or CETT 1409 ; College Level Readiness in Reading AND Writing
  
  •  

    ELMT 2437 - Electronic Troubleshooting, Service, and Repair


    4 Credits (3 hrs. lec., 3 hrs. lab.) In-depth coverage of electronic systems, maintenance, troubleshooting, and repair. Topics include symptom identification, proper repair procedures, repair checkout, and preventative maintenance. Emphasis on safety and use of test equipment. May be offered as a capstone course. Prerequisite: CETT 1403  and CETT 1405 
  
  •  

    HYDR 1305 - Basic Hydraulics


    3 Credits (2 hrs. lec., 2 hrs. lab.) Fundamentals of hydraulics including types of hydraulic pumps, cylinders, valves, motors, and related systems. Introduction to hydraulic schematic symbols as related to components. Prerequisite: None
  
  •  

    HYDR 1345 - Hydraulics and Pneumatics


    3 Credits (2 hrs. lec., 3 hrs. lab.) Discussion of the fundamentals of hydraulics and pneumatics, components of each system and the operations, maintenance, and analysis of each system. Prerequisite: None
  
  •  

    IEIR 1310 - Motor Controls


    3 Credits (2 hrs. lec., 4 hrs. lab.) General principles and fundamentals of electrical controls and control components including starters troubleshooting techniques, various protective devices, schematics, and diagrams. Student will develop hands-on skills using transformers, motors, magnetic control devices, relays, time delay circuits, reversing circuits and other control input devices. Prerequisite: CETT 1402  or CETT 1409  or CETT 1403  AND CETT 1405 
  
  •  

    IEIR 1312 - Distribution Systems


    3 Credits (2 hrs. lec., 3 hrs. lab.) Fundamentals of distribution systems including single phase and three phase systems, grounding, ground fault protection, and the National Electrical Safety Code. Prerequisite: ELPT 1311 
  
  •  

    INMT 1311 - Computer Integrated Manufacturing


    3 Credits (2 hrs. lec., 2 hrs. lab.) A study of the principles and application of computer integrated manufacturing including integration of material handling, manufacturing, and computer hardware and programming. Prerequisite: MCHN 1319  
  
  •  

    INMT 1417 - Industrial Automation


    4 Credits (3 hrs. lec., 2 hrs. lab.) Applications of industrial automation systems including identification of system requirements, equipment integration, motors, controllers, and sensors. Coverage of set-up, maintenance, and testing of the automated system. Prerequisite: RBTC 1401 , CETT 1402  or CETT 1409  
  
  •  

    INMT 1443 - CAD - CAM


    4 Credits (2 hrs. lec., 6 hrs. lab.) Computer-assisted applications in integrating engineering graphics and manufacturing. Emphasis on the conversion of working drawings using computer aided design/ computer aided manufacturing (CAD/CAM) software and related input and output devices translating into machine codes. Prerequisite: Instructor approval
  
  •  

    INMT 1491 - Special Topics - Industrial Manufacturing Technology/Technician


    4 Credits (3 hrs. lec., 3 hrs. lab.) Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. Prerequisite: College Level Readiness in Reading AND Writing
  
  •  

    INMT 2303 - Pumps, Compressors and Mechanical Drives


    3 Credits (2 hrs. lec., 2 hrs. lab.) A study of the theory and operations of various types of pumps and compressors. Topics include mechanical power transmission systems including gears, v-belts, and chain drives. Prerequisite: None
  
  •  

    INMT 2345 - Industrial Troubleshooting


    3 Credits (2 hrs. lec., 3 hrs. lab.) An advanced study of the techniques used in troubleshooting various types of industrial equipment to include mechanical, electrical, hydraulic, and pneumatic systems and their control devices. Emphasis will be placed on the use of schematics and diagrams in conjunction with proper troubleshooting procedures. Prerequisite: None
  
  •  

    INMT 2380 - Co-op Ed Industrial Manufacturing


    3 Credits (1 hr. lec., 20 hrs. ext.) Career-related activities encountered in the student’s area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. Prerequisite: Departmental approval
  
  •  

    INMT 2381 - Co-op Ed Industrial Manufacturing


    3 Credits (1 hr. lec., 20 hrs. ext.) Career-related activities encountered in the student’s area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. Prerequisite: Departmental approval
  
  •  

    INMT 2388 - Internship Manufacturing Technology/Technician


    3 Credits (15 hrs. ext.) A work-based learning experience that enables the student to apply specialized occupational theory, skills and concepts. A learning plan is developed by the college and the employer. Prerequisite: Departmental approval
  
  •  

    INMT 2389 - Internship Manufacturing Technology/Technician


    3 Credits (15 hrs. ext.) A work-based learning experience that enables the student to apply specialized occupational theory, skills and concepts. A learning plan is developed by the college and the employer. Prerequisite: Departmental approval
  
  •  

    OSHT 1316 - Material Handling


    3 Credits (3 hrs. lec.) Proper methods for material handling and storage including safety practices, proper equipment usage, engineering controls, and personal protective equipment. Prerequisite: None
  
  •  

    PTRT 1191 - Employment Preparation


    1 Credits (1 hr. lec.) This special topics course will assist the student in obtaining and filing the proper paperwork to be eligible for hiring by most public and private organizations. Prerequisite: None
  
  •  

    PTRT 1301 - Introduction to Petroleum Industry


    3 Credits (3 hrs. lec.) An introduction to the various aspects of petroleum industry including equipment, systems, instrumentation, operations, and the various scientific principles. Addresses a variety of petroleum technologies: exploration, drilling, production, transportation, marketing, and chemical processing industries. Prerequisite: College Level Readiness in Reading AND Writing; MATH 0308 
  
  •  

    PTRT 1303 - Drilling


    3 Credits (3 hrs. lec.) A study of practices and procedures for drilling operations. Rig equipment, casing design, fishing, and proper procedures to successfully drill a well are discussed. Prerequisite: College Level Readiness in Reading AND Writing.
  
  •  

    PTRT 1312 - Petroleum Regulations


    3 Credits (3 hrs. lec.) Regulatory requirements and structures associated with the petroleum industry. Prerequisite: College Level Readiness in Reading AND Writing.
  
  •  

    PTRT 1370 - Petroleum Geology


    3 Credits (3 hrs. lec., 1 hr. lab.) An introduction to the principles and practical application of geological and geophysical concepts in the petroleum industry. The course will focus on the use of facies models, rock shapes and structures porosity and permeability, geophysical logs, drillstem tests, drilling, and production strategies in petroleum exploration. Prerequisite: College Readiness in Reading AND Writing; MATH 0308 
  
  •  

    PTRT 1371 - Petroleum Data Management I - Exploration


    3 Credits (3 hrs. lec., 1 hr. lab.) Overview of computer applications in exploration; covers the history, fundamentals, terminology and software for exploration; introduction to the principles of geology, geophysics and petro-physics. Prerequisite: College Readiness in Reading and Writing; MATH 0308 
  
  •  

    PTRT 1372 - Petroleum Data Management II - Drilling and Production


    3 Credits (2 hrs. lec., 2 hrs. lab.) Overview of computer applications in drilling and production. Covers the history, fundamentals, terminology and software for drilling and production. Introduction to the principles of drilling, production and reservoir. Prerequisite: College Readiness in Reading and Writing; MATH 0308 ; PTRT 1371 
  
  •  

    PTRT 1373 - Exploration and Production I


    3 Credits (3 hrs. lec., 1 hr. lab.) Overview of various aspects of deepwater operations deepwater exploration, drilling and completing wells, development of production systems. Prerequisite: College Readiness in Reading and Writing; MATH 0308 ; PTRT 1301 .
  
  •  

    PTRT 1374 - Exploration and Production II


    3 Credits (3 hrs. lec., 1 hr. lab.) Continue with exploration and production principles including drilling rigs, giant oil and gas fields, beam pumpers, and geological classifications. Prerequisite: College Readiness in Reading and Writing; MATH 0308 ; PTRT 1373 .
  
  •  

    PTRT 1424 - Petroleum Instrumentation


    4 Credits (3 hrs. lec., 3 hrs. lab.) Study of instruments, instrument systems, terminology, process variables, and control coops as used in a petroleum environment. Prerequisite: CETT 1402  or CETT 1409  
  
  •  

    PTRT 1491 - Petroleum Troubleshooting


    4 Credits (2 hrs. lec., 4 hrs. lab.) Application of petroleum related systems. Emphasizes related to equipment and devices used in the petroleum production field to solve and troubleshoot problems in the field. Prerequisite: College Level Readiness in Reading AND Writing.
  
  •  

    PTRT 2271 - Internship - Petroleum Technology


    2 Credits A work-based learning experience that enables the student to apply specialized occupational theory, skills and concepts. A learning plan is developed by the college and the employer. Prerequisite: Departmental approval; College Readiness in Reading and Writing ;MATH 0308 
  
  •  

    PTRT 2272 - Petroleum Data: Special Project


    2 Credits (2 hrs. lec.) Topics address recently identified current events, skills, knowledge, technology and/or workplace attitudes and behaviors pertinent to the occupation and professional development of the student. The students will complete a project based on a real industry need. Prerequisite: Departmental Approval
  
  •  

    PTRT 2331 - Well Completions


    3 Credits (3 hrs. lec.) Drilling and wellbore analysis data to develop a well completion plan. A study of practices and procedures that are involved in drilling operations and evaluate the effects of production operations choosing the tools and procedures for completing a drilled well-bore. Topics on rig equipment, casing design, fishing, and proper procedures to successfully drill a well are implemented; instruction in volume calculations, hydrostatic pressures, formations pressures, and analyzing problems in down-hole drilling operations. Prerequisite: PTRT 1301 
  
  •  

    PTRT 2370 - Petroleum Data Management III - Facilities & Performance


    3 Credits (3 hrs. lec., 1 hr. lab.) Overview of computer applications in surface facilities and automation. Covers the history, fundamentals, terminology and software for surface facilities and automation. Prerequisite: College Readiness in Reading and Writing; MATH 0308 ;   PTRT 1372 ; or Instructor Consent
  
  •  

    PTRT 2380 - Cooperative Education - Petroleum Technology/Technician


    3 Credits (1 hr. lec., 20 hrs. ext.) Career-related activities encountered in the student’s area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. Prerequisite: College Level Readiness in Reading AND Writing; Instructor approval.
  
  •  

    RBTC 1305 - Robotic Fundamentals


    3 Credits (2 hrs. lec., 3 hrs. lab.) An introduction to flexible automation. Topics include installation, repair, maintenance, and development of flexible robotic manufacturing systems. Prerequisite: RBTC 1401 , CETT 1402  or CETT 1409  
  
  •  

    RBTC 1401 - Programmable Controllers


    4 Credits (3 hrs. lec., 3 hrs. lab.) A study in programmable controllers. Topics include processor units, numbering systems, memory organization, relay type devices, times, counters, data manipulators and programming and troubleshooting skills on a cross section of industrial PLCs. Prerequisite: CETT 1402  or CETT 1409  

Engineering

  
  •  

    ENGR 1201 - Introduction to Engineering


    2 Credits (2 hrs. lec.) An introduction to the engineering profession with emphasis on technical communication and team-based engineering design. (1401015110) Prerequisite: College Level Readiness in Reading AND Writing; MATH 1314 .
  
  •  

    ENGR 1304 - Engineering Graphics I


    3 Credits (2 hrs. lec., 4 hrs. lab.) Introduction to computer- aided drafting using CAD software and sketching to generate two- and three-dimensional drawings based on the conventions of engineering graphical communication; topics include spatial relationships, multi-view projections and sectioning, dimensioning, graphical presentation of data, and fundamentals of computer graphics. Prerequisite: MATH 1314  
  
  •  

    ENGR 2301 - Engineering Mechanics: Statics


    3 Credits (3 hrs. lec.) Basic theory of engineering mechanics, using calculus, involving the description of forces, moments, and couples acting on stationary engineering structures; equilibrium in two and three dimensions; free-body diagrams; friction; centroids; centers of gravity; and moments of inertia. (1411015210) Prerequisite: PHYS 2425   Corequisite: MATH 2414  unless course has already been taken.
  
  •  

    ENGR 2302 - Engineering Mechanics: Dynamics


    3 Credits (3 hrs. lec.) Basic theory of engineering mechanics, using calculus, involving the motion of particles, rigid bodies, and systems of particles; Newton’s Laws; work and energy relationships; principles of impulse and momentum; application of kinetics and kinematics to the solution of engineering problems. (1411015310) Prerequisite: ENGR 2301  
  
  •  

    ENGR 2304 - Programming for Engineers


    3 Credits (2 hrs. lec., 4 hrs. lab.) Programming principles and techniques for matrix and array operations, equation solving, and numeric simulations applied to engineering problems and visualization of engineering information; platforms include spreadsheets, symbolic algebra packages, engineering analysis software, and laboratory control software. (1102015207) Prerequisite: College Level Readiness in Reading AND Writing. Corequisite: MATH 2413  
  
  •  

    ENGR 2308 - Engineering Economics


    3 Credits (3 hrs. lec.) Methods used for determining the comparative financial desirability of engineering alternatives. Provides the student with the basic tools required to analyze engineering alternatives in terms of their worth and cost, an essential element of engineering practice. The student is introduced to the concept of the time value of money and the methodology of basic engineering economy techniques. The course will address some aspects of sustainability and will provide the student with the background to enable them to pass the Engineering Economy portion of the Fundamentals of Engineering exam. (1499995110) Prerequisite: MATH 2413  
  
  •  

    ENGR 2333 - Elementary Chemical Engineering


    3 Credits (3 hrs. lec.) This course is the foundation for nearly all future chemical engineering courses and analysis. A strong foundation in mathematics, physics, and chemistry is required for application to the solution of problems in industrial chemistry. Students will receive an introduction to chemical engineering calculations, unit equations, process stoichiometry, material and energy balances, and states of matter, and will apply the laws of conservation of mass and energy to reacting and non-reacting, simple and complex chemical systems. (1407015110) Prerequisite: ENGR 1201  and CHEM 1412  and MATH 2414  and PHYS 2425  
  
  •  

    ENGR 2334 - Chemical Engineering Thermodynamics I


    3 Credits (3 hrs. lec.) Fundamental concepts of energy and thermodynamics (e.g., temperature, thermodynamic equilibrium, and heat) will be introduced; the course emphasizes techniques in the application of the fundamentals of thermodynamics to various processes as they frequently occur in chemical and bimolecular engineering. Provides the basic skills and tools necessary in designing and analyzing real-life engineering systems. Serves as preparation for other advanced courses in thermodynamics, energy conversion, heat transfer, etc. (1407015210) Prerequisite: MATH 2415  
  
  •  

    ENGR 2405 - Electrical Circuits I


    4 Credits (3 hrs. lec., 3 hrs. lab) Principles of electrical circuits and systems. Basic circuit elements (resistance, inductance, mutual inductance, capacitance, independent and dependent controlled voltage, and current sources). Topology of electrical networks; Kirchoff’s laws; node and mesh analysis; DC circuit analysis; operational amplifiers; transient and sinusoidal steady-state analysis; AC circuit analysis; first- and second-order circuits; Bode plots; and use of computer simulation software to solve circuit problems. Laboratory experiments supporting theoretical principles involving DC and AC circuit theory, network theorems, time, and frequency domain circuit analysis. Introduction to principles and operation of basic laboratory equipment; laboratory report preparation. (1410015110) Prerequisite: PHYS 2425  and MATH 2414  and MATH 2320 . Corequisite: MATH 2320  
  
  •  

    ENGR 2406 - Introduction to Digital Systems


    4 Credits (3 hrs. lec., 3 hrs. lab.) Introduction to theory and design of digital logic, circuits, and systems. Number systems, operations and codes; logic gates; Boolean Algebra and logic simplification; Karnaugh maps; combinational logic; functions of combinational Logic; flip-flops and related devices; counters; shift registers; sequential logic; memory and storage. Basic laboratory experiments supporting theoretical principles  involving design, construction, and analysis of combinational and sequential digital circuits and systems, including logic gates, adders, multiplexers, encoders, decoders, arithmetic logic units, latches, flip-flops, registers, and counters; preparation of laboratory reports. Prerequisite: MATH 1314  

Engineering Technology

  
  •  

    ARCE 1315 - Structural Steel Detailing


    3 Credits (2 hrs. lec., 4 hrs. lab.)  This course covers the preparation of structural steel drawings and bills of material for the purpose of fabrication and erection. Emphasis will be placed upon using structural design framing plans to develop detailed steel members, connections, and assemblies. Prerequisite: ARCE 1352 ; MATH 1316 ; College Level Readiness in Reading AND Writing
  
  •  

    ARCE 1352 - Structural Drafting


    3 Credits (2 hrs. lec., 4 hrs. lab.) A study of structural systems including concrete foundations and frames, wood framing and trusses, and structural steel framing systems. Includes detailing of concrete, wood, and steel to meet industry standards including the American Institute of Steel Construction and The American Concrete Institute. Prerequisite: DFTG 1305   DFTG 1309 ; CNBT 1311 ; College Level Readiness in Reading AND Writing; Corequisite: DFTG 2319  
  
  •  

    CETT 1329 - Solid State Devices


    3 Credits (2 hrs. lec., 4 hrs. lab.) A study of diodes, transistor characteristics and other semiconductor devices, including analysis of static and dynamic characteristics, biasing techniques, and thermal considerations. The course will also cover industrial applications such as instrumentation. Prerequisite: College Level Readiness in Reading AND Writing; CETT 1409 ; MATH 0306 

     

  
  •  

    CETT 1402 - Electricity Principles


    4 Credits (3 hrs. lec., 2 hrs. lab.) Principles of electricity including proper use of test equipment, A/C and D/C circuits, and component theory and operation. Prerequisite: None
  
  •  

    CETT 1403 - DC Circuits


    4 Credits (3 hrs. lec., 3 hrs. lab.) A study of the fundamentals of direct current including Ohm’s law, Kirchoff’s laws and circuit analysis techniques. Emphasis on circuit analysis of resistive networks and DC measurements. Corequisite: MATH 1314  
  
  •  

    CETT 1405 - AC Circuits


    4 Credits (3 hrs. lec., 3 hrs. lab.) A study of the fundamentals of alternating current including series and parallel AC circuits, phasors, capacitive and inductive networks, transformers, and resonance. Prerequisite: CETT 1403 ; ENGL 0304  or ESOL 0364 AND ENGL 0306  or ESOL 0374  OR ENGL 0302  ; MATH 0306  

     

  
  •  

    CETT 1409 - DC-AC Circuits


    4 Credits (3 hrs. lec., 3 hrs. lab.) Fundamentals of DC circuits and AC circuits operation including Ohm’s law, Kirchoff’s laws, networks, transformers, resonance, phasors, capacitive and inductive and circuit analysis techniques. Prerequisite: None
  
  •  

    CETT 1425 - Digital Fundamentals


    4 Credits (3 hrs. lec., 3 hrs. lab.) An entry level course in digital electronics to include numbering systems, logic gates, Boolean algebra, and combinational logic. Prerequisite: CETT 1409 ; ENGL 0304  or ESOL 0364  AND ENGL 0306  or ESOL 0374  OR ENGL 0302 ; MATH 0306 
  
  •  

    CETT 1445 - Microprocessor


    4 Credits (3 hrs. lec., 3 hrs. lab.) An introductory course in microprocessor software and hardware; its architecture, timing sequence, operation, and programming; and discussion of appropriate software diagnostic language and tools. Prerequisite: CETT 1425 ; ENGL 0304  or ESOL 0364 AND ENGL 0306  or ESOL 0374  OR ENGL 0302 ; MATH 0306  
  
  •  

    CETT 1457 - Linear Integrated Circuits


    4 Credits (3 hrs. lec., 3 hrs. lab.) A study of characteristics, operations, stabilization, and testing of linear integrated circuits. Applications include instrumentation and active filtering. Prerequisite: College Level Readiness in Reading AND Writing, CETT 1329 MATH 0306  
  
  •  

    CETT 1491 - Special Topics in Computer Engineering Technology/Technician


    4 Credits (3 hrs. lec., 2 hrs. lab.) Topics/projects address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. Working with the instructor, the advanced network/telecommunications student selects, develops an advanced design project or performs an advanced activity in a specific area of employment in the field of networking or telecommunications. This is a capstone experience. Prerequisite: College Level Readiness in Reading AND Writing, Departmental approval

     

     

  
  •  

    CETT 2449 - Research and Project Design


    4 Credits (3 hrs. lec., 3 hrs. lab.) Principles of electrical/ electronic design encompassing schematics wiring diagrams, materials lists, operating characteristics, completion schedules, and cost estimates. Working with the instructor, the advanced student selects, develops an advanced design project or performs an advanced activity in a specific area of employment. This is a capstone experience. Prerequisite: College Level Readiness in Reading AND Writing, Near program completion or departmental approval. 

     

  
  •  

    CNBT 1311 - Construction Materials and Methods I


    3 Credits (2 hrs. lec., 4 hrs. lab.) An introduction to construction materials and methods and their applications. Prerequisite: None
  
  •  

    CNBT 1342 - Building Codes and Inspections


    3 Credits (3 hrs. lec.) An examination of the building codes and standards applicable to building construction and inspection processes. Prerequisite: CNBT 1311 , DFTG 1305 , or DFTG 1309  and ENGL 1301  
  
  •  

    CPMT 1403 - Introduction to Computer Technology


    4 Credits (3 hrs. lec., 2 hrs. lab.) A fundamental computer course that provides in-depth explanation of the procedures to utilize hardware and software. Emphasis on terminology, acronyms, and hands-on activities. Specific, hands-on training using word processing, spreadsheets, database, Internet, and personal computer operating system commands (DOS and Windows) are provided. Prerequisite: CELT score of 60; ENGL 0304  or ESOL 0364 AND ENGL 0306  or ESOL 0374  OR ENGL 0302 MATH 0306 .
  
  •  

    CPMT 1445 - Computer Systems Maintenance


    4 Credits (3 hrs. lec., 2 hrs. lab.) A study of the components within a computer system. Development of testing and troubleshooting skills. Prerequisite: CPMT 1403  or ITSC 1301 ENGL 0304  or ESOL 0364 AND ENGL 0306  or ESOL 0374  OR ENGL 0302  ; MATH 0306 .
  
  •  

    CPMT 1449 - Computer Networking Technology


    4 Credits (3 hrs. lec., 3 hrs. lab.) A beginning course in computer networks with focus on networking fundamentals, terminology, hardware, software, and network architecture. A study of local/wide area networking concepts and networking installations and operations. Prerequisite: College Level Readiness in Reading AND Writing,  Prerequisite/Corequisite: Prerequisite or Corequisite: CPMT 1445  
  
  •  

    CPMT 2302 - Home Technology Integration


    3 Credits (1 hr. lec., 4 hrs. lab.) A study of integration and maintenance of various home technology subsystems. Includes home automation, security and surveillance, home networks, video and audio networks, and structured wiring. Prerequisite: ITSC 1301  
  
  •  

    CPMT 2433 - Computer Integration


    4 Credits (3 hrs. lec., 3 hrs. lab.) An advanced course in integration of hardware, software, and applications. Customization of computer systems for specific applications in engineering, multimedia, or data acquisition. Prerequisite: College Level Readiness in Reading AND Writing, CPMT 1449 ;  Corequisite: MATH 1314  
  
  •  

    CPMT 2445 - Computer Systems Troubleshooting


    4 Credits (3 hrs. lec., 2 hrs. lab.) Principles and practices involved in computer system troubleshooting techniques and repair procedures including advanced diagnostic test programs and the use of specialized test equipment. Prerequisite: College Level Readiness in Reading AND Writing, CPMT 1445  
  
  •  

    CPMT 2449 - Advanced Computer Networking Technology


    4 Credits (3 hrs. lec., 2 hrs. lab.) An in-depth study of network technology with emphasis on network operating systems, network connectivity, hardware, and software. Mastery of implementation, troubleshooting, and maintenance of LAN and/or WAN network environments. Prerequisite: College Level Readiness in Reading AND Writing, CPMT 1449  
  
  •  

    DFTG 1305 - Technical Drafting


    3 Credits (2 hrs. lec., 4 hrs. lab.) Introduction to the principles of drafting to include terminology and fundamentals, including size and shape descriptions, projection methods, geometric construction, sections, and auxiliary views. Prerequisite: None
  
  •  

    DFTG 1309 - Basic Computer-Aided Drafting


    3 Credits (2 hrs. lec., 4 hrs. lab.) An introduction to computer-aided drafting. Emphasis is placed on setup; creating and modifying geometry; storing and retrieving predefined shapes; placing, rotating, and scaling objects, adding text and dimensions, using layers, coordinate systems; and plot/print to scale. Prerequisite: None
  
  •  

    DFTG 1317 - Architectural Drafting Residential


    3 Credits (2 hrs. lec., 4 hrs. lab.) Architectural drafting procedures, practices, terms, and symbols. Preparation of detailed working drawings for residential structures. Emphasis on light frame construction methods. Prerequisite: DFTG 1305 , DFTG 1309 , DFTG 2331  and CNBT 1311  
  
  •  

    DFTG 1325 - Blueprint Reading and Sketching


    3 Credits (2 hrs. lec., 2 hrs. lab.) An introduction to reading and interpreting working drawings for manufactured products and associated tooling; use sketching techniques to create pictorial and multiple- view drawings. The student will solve related math equations, geometric dimensioning and tolerancing; and interpreted shop operations. Prerequisite: College Level Readiness in Reading AND Writing, Placement into MATH 1314  or credit for MATH 0310  with a grade of “C” or better or instructor approval
  
  •  

    DFTG 1371 - Metal Building Systems I


    3 Credits (3 hrs. lec.) Course introduces the student to pre-engineered metal building framing, component and design systems. Prerequisite: CNBT 1311  
  
  •  

    DFTG 1391 - ST Drafting And Design Technology


    3 Credits (2 hrs. lec., 4 hrs. lab.) Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course was designed to be repeated multiple times to improve student proficiency. Prerequisite: Departmental approval.
  
  •  

    DFTG 2302 - Machine Drafting


    3 Credits (2 hrs. lec., 4 hrs. lab.) Production of detail and assembly drawings of machines, threads, gears, utilizing tolerances, limit dimensioning, and surface finishes. Prerequisite: DFTG 1305  and DFTG 1309  
  
  •  

    DFTG 2307 - Electrical Drafting


    3 Credits (2 hrs. lec., 2 hrs. lab.) A study of area lighting, control systems and power layouts, electrical and safety codes, load factors and distribution requirements. Prerequisite: College Level Readiness in Reading AND Writing, MATH 0310  
  
  •  

    DFTG 2312 - Technical Illustration


    3 Credits (2 hrs. lec., 4 hrs. lab.) Topics include pictorial drawing including isometrics, obliques, perspectives, charts, and graphs; shading and transfer lettering; and use of different media. Prerequisite: DFTG 1305 ,  DFTG 1309  or DFTG 2319   
  
  •  

    DFTG 2319 - Intermediate Computer-Aided Drafting


    3 Credits (2 hrs. lec., 4 hrs. lab.) A continuation of practices and techniques used in basic computer-aided drafting including the development and use of prototype drawings, construction of pictorial drawings, extracting data, and basics of 3D. Prerequisite: DFTG 1309  or departmental approval
  
  •  

    DFTG 2321 - Topographical Drafting


    3 Credits (2 hrs. lec., 2 hrs. lab.) Plotting of surveyor’s field notes. Includes drawing elevations, contour lines, plan and profiles based on digital terrain models, and laying out traverses. Prerequisite: College Level Readiness in Reading AND Writing, DFTG 1309  
  
  •  

    DFTG 2323 - Pipe Drafting


    3 Credits (2 hrs. lec., 4 hrs. lab.) A study of pipe fittings, symbols, specifications and their applications to a piping process system. Creation of symbols and their usage in flow diagrams, plans, elevations, and isometrics. Prerequisite: DFTG 1305  and DFTG 1309  
  
  •  

    DFTG 2328 - Architectural Drafting Commercial


    3 Credits (2 hrs. lec., 4 hrs. lab.) Architectural drafting procedures, practices, governing codes, terms and symbols including the preparation of detailed working drawings for a commercial building, with emphasis on commercial construction methods. Prerequisite: DFTG 1305 , DFTG 1309  or CNBT 1311  or DFTG 2319  and DFTG 2331  
  
  •  

    DFTG 2331 - Advanced Technologies in Architectural Design and Drafting


    3 Credits (2 hrs. lec., 4 hrs. lab.) Use of architectural specific software to execute the elements required in designing standard architectural exhibits utilizing custom features to create walls, windows and specific design requirements for construction in residential/ commercial and industrial architecture. Prerequisite: DFTG 1305  and DFTG 1309  
  
  •  

    DFTG 2335 - Advanced Technologies in Mechanical Design


    3 Credits (2 hrs. lec., 4 hrs. lab.) Use parametric based mechanical design software for mechanical assembly design and drafting. Prerequisite: DFTG 1305 MCHN 1319  or DFTG 1309  
  
  •  

    DFTG 2336 - Computer Aided Drafting Programming


    3 Credits (2 hrs. lec., 4 hrs. lab.) Use of programming language to enhance CAD Software. Prerequisite: College Level Readiness in Reading AND Writing, DFTG 1305  and DFTG 1309  or DFTG 2319  
  
  •  

    DFTG 2338 - Final Project: Advanced Drafting


    3 Credits (2 hrs. lec., 4 hrs. lab.) A drafting course in which students participate in a comprehensive project from conception to conclusion. Prerequisite: Departmental approval
  
  •  

    DFTG 2340 - Solid Modeling/Design


    3 Credits (2 hrs. lec., 4 hrs. lab.) A computer-aided modeling course. Development of three-dimensional drawings and models from engineering sketches and orthographic drawings and utilization of three-dimensional models in design work. Prerequisite: DFTG 1305  and DFTG 1309  
  
  •  

    DFTG 2371 - Metal Building Systems II


    3 Credits (2 hrs. lec., 4 hrs. lab.) Course introduces student to detailing, fabrication, and field erection of pre-engineered metal building framing and component systems. Prerequisite: DFTG 1371 ; MATH 1316  
 

Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 -> 15